BECOME A STOCKIST

CIRCUIT PROTECTION

DEVICES

POPULATED

BOARDS

UNPOPULATED

BOARDS

RECESSED

BOARDS

IP RATED

BOARDS

ACCESSORIES

 

A New and Innovative range of easy to install and set-up residential floodlights

• Unlimited adjustment allows light to be positioned exactly where needed

• High Lm/W output offers high performance
• Enhanced diffusing 'anti-glare' lens

• Saves energy through the adjustable PIR’s dusk till dawn mode

• IP65 rated floodlight and PIR, for full weatherproof protection

• Conveniently supplied with 1 metre of pre-wired cable, for easy installation

MODEL SHOWN :

LFSP30B130

Increased LED performance

High power LED chips provides extra output and a higher Llm/cW

A comprehensive range of Consumer Units and Circuit Protection Devices.

CIRCUIT PROTECTION

DEVICES

CUSPDT21_0100_LA_BASE.png

SPD DEVICES

SPDs provide protection from two forms of surge, LEMP – Lightning Electro Magnetic Pulse and SEMP – Switching Electro Magnetic Pulse. SPDs do no protect an installation from lighting strikes.

 
 

A comprehensive range of Consumer Units and Circuit Protection Devices.

CIRCUIT PROTECTION

DEVICES

CUSPDT21_0100_LA_BASE.png

SPD DEVICES

SPDs provide protection from two forms of surge, LEMP – Lightning Electro Magnetic Pulse and SEMP – Switching Electro Magnetic Pulse. SPDs do no protect an installation from lighting strikes.

CUR10030A_0101_LA_UP.png

RCD DEVICES

  • Double pole, Type A 30mA 40A/63A/80A/100A - Type AC 30mA 40A/63A/80A 80A 100mA & 100mA (TD)

  • Positive contact status indication 

  • Device can be locked in ‘ON’ or ‘OFF’ position

CUSW100_0101_LA_UP.png

MAIN SWITCH

  • Double pole 100A Main Switch with positive contact status indication

  • Device can be locked in ‘ON’ or ‘OFF’ position 

CUCRB32A_0100_LA_DOWN copy.png

RCBO DEVICES

  • Single pole – B or C curve in Type AC

  • Breaking capacity 6kA, rating options 6A 30mA – 40A 30mA

  • Type A and AC and in B & C Curve options.

CUMC6_LA.png

MCB SWITCH

Single pole – B or C curve 

Breaking Capacity 6kA, rating options 6A – 50A

CUTS5_0100_LA_CLOSED copy.png

CONTROL DEVICES

  • Control Devices;

  • Bell Transformer 

  • Digital Timer

  • Analogue Timer

  • Time Delay Switch

  • Contactor 20A/40A Double Pole

 

POPULATED BOARDS

Built for any application


The Fortress range of consumer units is not only functional, stylish and innovative, but also offers you a wide range of configurations to suit your exact needs. Our range of populated boards comes fitted in a premium steel enclosure with ample space for cable management, even with RCBO’s fitted, allowing for smart, flexible design solutions. Better cable retention due to large screws, enabling greater torque and cables fitted with ferrules.

CFUDP18811ASPD_open_F_201.png
Populated CU Lifestyle A.jpg

SPD BOARDS

  • 100A Main Switch w/SPD Boards
    100A Main Switch, RCBO Type A w/SPD Boards

  • 100A Main Switch, RCBO Type AC w/SPD Boards

  • RCD Incomer Type A w/SPD Boards

  • RCD Incomer Type AC w/SPD Boards

  • RCBO B Curve Type A, 100A Main Switch w/SPD Boards

  • RCBO B Curve Type AC, 100A Main Switch w/SPD Boards

DUAL RCD BOARDS

  • Both Type A & Type AC options available

  • Wide range of ways available; 6, 10, 13 & 16 

  • SPD options available

 

RCBO MAIN SWITCH BOARDS

  • Both Type A & Type AC options available

  • Wide range of RCBO's fitted from; 4, 6, 8 & 10 devices

 

UNPOPULATED BOARDS

Customisable for all applications

From 4 to 20 way unpopulated boards, our Fortress range offers a variety of unpopulated board to allow full customisability with our devices making it a versatile and solid solution for any application.

100A MAIN SWITCH BOARDS

  • Supplied with 100A Main Switch

  • IP 2XC w/cover blanks supplied

  • 4, 7, 10, 14, 17 & 20 way options available

RCD INCOMER BOARDS

  • Both Type A & AC boards supplied

  • Protection given by 30mA RCD

  • 4, 7, 10, 14, 17 & 20 way options available

DUAL RCD BOARDS

  • Both Type A & AC boards supplied

  • Supplied with optional High Integrity as standard

  • 6, 10, 13, & 16 way options available

CFUSW20; Main Switch Unpopulated Consumer Unit

22 Modules, 20 Ways, 100A Main Switch, IP; 2XC w/4x Cover Blanks

CFUSW14_0110_F_OPEN.png
 

RECESSED BOARDS

AESTHETICS TO MATCH FUNCTIONALITY

Specifically designed to be fully recessed, within a wall or cavity with a depth of up to 68mm, our range of Recessed boards offer the same premium build and functionality, and customisable configuration options in a more compact way to fit in with the smaller builds that are becoming increasing common with new housing estates.

NO SACRIFICE ON QUALITY

All of our boards still comply with all the relevant regulations and standards, and we still offer a range of board sizes, ways and pre-made configurations as well as the ability to swap and change depending on the installation.

OUT OF SIGHT, OUT OF MIND

Consumer units were never made to be pretty or good looking, hide them behind doors, in the garage - out of the way. With our recessed boards you won’t be embarrassed to have one of these in the hallway or on show, it’ll blend in with any modern decor and saving space perfect for smaller domestic applications and housing estates.

_0000_Recessed_Consumer_unit.jpg
 

WEATHERPROOF IP65 RATED BOARDS

Designed and built to the same premium standards as the rest of the range; durable steel body with IP65 for ingress and water protection - these enclosures are built to last - all holding a 10 year warranty. Suitable for installation in areas subject to damp and moisture, including domestic applications such as house and loft extensions, garages, sheds, workshops and summer houses, as well as commercial installations from spa’s to indoor pools.

CFUGAR1_0110_F_OPEN.png
CFUGAR1_0112_F_INNERS.png
IP Rated CU LS - Fortress LP.jpg
  • IP65 Rated c/w Ø20mm knockouts

  • Durable steel body build

  • Knockouts drillable to 32mm

  • 10 year warranty

  • 5 module enclosures accept SP RCBOs

  • Manufactured and tested to the latest standards; BS EN 61439

  • Enclosure kits supplied complete with devices, DIN rail, neutral cable, neutral and earth terminals, cover blanks and busbar

 
Accessories.png

ACCESSORIES

From blank covers, 21way busbars, MCB blanks, label sheets, lockable covers and a range of gland kits including locknuts, adaptors and inserts, the range of accessories will help you finish off any service and installation.

 

Built to last we put the same effort into accessory components as the boards themselves to ensure peace of mind that you can do a complete job, no sacrifices, no second thoughts, no missing checkboxes.

Your project ... your solutions

Bespoke configurations customisable to fit any application. Combining our extensive range of circuit protection devices - spanning both A and AC RCBO’s, both B and C Curve MCB’s and up to 100Amp RCD’s, with our extensive range of board way sizes, BG range offers ultimate control over customisability to suite any application and situation.

 

SOLUTIONS FOR ANY APPLICATION

We offer a wide range of unpopulated boards to help with any application, from Main Switch boards that span 4, 7, 10, 14, 17 and 20 way to Dual RCD boards covering 6, 10, 13 and 16 ways, we’ve got a solution to fit any situation. 

 

LATEST IN SURGE PROTECTION TECHNOLOGY

Our latest Type 2 SPD offers maximum protection within the consumer unit. Space saving 1 module design allows our SPD directly fitted on the DIN rail into the board with minimum hassle whilst being fully compliant with BSEN61643-11, BSEN62305 & BS7671 standards.

FULL CONTROL OVER RCD AND RCBO DEVICES

With all the ongoing changes and updates to the 18th Edition Regulations some competitors are cutting out certain device types, at BG we continue to offer the full range of RCD and RCBO types to allow full autonomy and control over serving and board installation.

Housebuilder_Brochuer_Cover_Thumb.jpg
 

RCD KNOW HOW ...

Our residual current devices (RCD) are classified as type AC, type A and are as follows :

TYPE AC
Ensures tripping for residual AC currents


TYPE A
Ensures tripping for residual AC currents and pulsating DC currents

For most applications type AC devices are most suitable. Where loads produce DC currents such as electric vehicle charging points then type A RCD will need to be considered. The decision to fit type A RCD will depend on the potential level of DC current and the manufacturers data for the equipment would need to be consulted.

November Fortress Install Banner.png
Register Interest

Thanks for registering your interest

Sign up to receive latest news,

product launches, updates & offers

BG Electrical do not share your information with any third-parties. You may unsubscribe from mailings at any time.
You can read our Privacy Policy Here.

Become a Stockist

Fill out the short form below and one of our

Sales Reps will contact you for further details

Thanks for submitting, we'll be in touch shortly

 

Please fill in the short form below

and one of our Sales Reps will contact you 

Social Media

Download Our App

  • Instagram I Luceco Lighting
  • Facebook I Luceco PLC
  • Twitter I Luceco PLC
  • YouTube I Luceco PLC

01952 238 100     info@luceco-marketing.com   I   www.luceco-marketing.com

Luceco Group, Stafford Park 1, Telford, Shropshire TF3 3BD

2022 Luceco Group  I   Privacy Policy  I   Contact